Shop for Jaguar Parts
and Land Rover Parts
Online and Save!
Fixing a Sagging Load Compensator
Having trouble with your Classic Range Rover's rear end sagging? It may be the load compensator.
 |
The load compensator on Classic Range Rovers can cause the rear end to sag if it is either removed or damaged. For a quick fix, install Dobinsons Rear Coil Springs. The load compensator can then be removed without fear of sagging. The Dobinsons Springs will provide support for the rear end, in addition to allowing the suspension to move more freely and making the vehicle ride much smoother. Dobinsons Springs will slightly raise the rear end of your Range Rover by about 3/4" to 1". |
Click here to ask and answer questions in our forums!
Return to Tech Tips page
The above information is provided in good faith based upon the information presented by the customer. British Parts International is not responsible for any loss or damage resulting from inaccuracies or errors in any of the information provided or any acts or omissions taken in response to our advice. Your use of this web site constitutes acceptance of the BPI Terms and Conditions.
Copyright ©
Darkhorse Wheel & Traction Corporation.
